欢迎光临
我的个人博客网站

进口污水潜水泵原理特点及品牌(图)

 

进口污水潜水泵原理特点及品牌(图)

作者:托马斯·贝尔森·伍德 发布时间:2021-01-16 13:06:11点击:201
进口污水潜水泵原理特点及品牌(图)

进口污水潜水泵原理特点

进口污水潜水泵是在德国托马斯(Thomas)工厂先进技术的基础上,结合国际水泵的使用特点而研制成功的新一代泵类产品,具有节能效果显著、防缠绕、无堵塞、自动安装和自动控制等特点。在排送固体颗粒和长纤维垃圾方面,具有独特效果。该系列泵采用独特叶轮结构和新型机械密封,能有效地输送含有固体物和长纤维。叶轮与传统叶轮相比,该泵叶轮采用单流道或双流道形式,它类似于一截面大小相同的弯管,具有非常好的过流性,配以合理的蜗室,使得该泵具有效率高、叶轮经动静平衡试验,使泵在运行中无振动。
产品特点
1、采用独特的单片或双叶片叶轮结构,大大提高了污物通过能力,能有效的通过泵口径的5倍纤维物质与直径为泵口径约50%的固体颗粒。
2、机械密封采用新型硬质耐腐的钛化钨材料,可使泵安全连续运行8000小时以上。
3、整体结构紧凑、体积小、噪声小、节能效果显著,检修方便,无需建泵房,潜入水中即可工作,大大减少工程造价。
4、该泵密封油室内设置有高精度抗干扰漏水检测传感器,定子绕组内预埋了热敏元件,对水泵电机自动保护。
5、可根据用户需要配备全自动控制柜,对泵的漏水、漏电过载及超温等进行自动保护,提高了产品的安全性与可靠性
6、浮球开关可以根据所需液位变化,自动控制泵的起动与停止,不需专人看管,使用极为方便。
7、可根据用户需要配备双导轨自动耦合安装系统,它给安装、维修带来更大方便,人可不必为此而进入污水坑。
8、能够在全扬程内使用,而保证电机不会过载。
9、有两种不同的安装方式,固定式自动耦合安装系统、移动式自由安装系统。
主要用途
适用于化工、石油、制药、采矿、造纸工业、水泥厂、炼钢厂、电厂、煤加工工业,以及城市污水处理厂排水系统、市政工程、建筑工地等行业输送带颗粒的污水、污物,也司用于抽送清水及带腐蚀性介质。
Diving sewage pump is in Germany Thomas (Thomas) factory on the basis of advanced technology, combined with the characteristics of the use of international pumps and the successful development of a new generation of pump products, with significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control And so on. In the discharge of solid particles and long fiber garbage, has a unique effect. The series of pumps with a unique impeller structure and a new mechanical seal, can effectively transport containing solid and long fiber. Impeller Compared with traditional impeller, the pump impeller with a single channel or double channel form, it is similar to a cross-section of the same size of the elbow, with a very good overcurrent, coupled with a reasonable spiral chamber, making the pump with efficiency High, impeller by static and static test, so that the pump in the run without vibration.
Features
1, the use of a unique single or double blade impeller structure, greatly improving the dirt through the ability to effectively pass the pump diameter of 5 times the fiber material and diameter of about 50% of the diameter of the pump particles.
2, the mechanical seal with a new hard corrosion-resistant titanium tungsten material, the pump can run continuously for more than 8000 hours.
3, the overall structure of compact, small size, low noise, energy saving effect is significant, easy maintenance, no need to build pump room, dive into the water to work, greatly reducing the cost of the project.
4, the pump sealed oil room is equipped with high precision anti-jamming leak detection sensor, the stator winding embedded thermal elements, the pump motor automatic protection.
5, according to user needs with automatic control cabinet, the pump leakage, leakage overload and over-temperature, such as automatic protection, improve product safety and reliability
6, the float switch can be based on the required level changes, automatic control of the pump start and stop, without special care, the use of extremely convenient.
7, according to user needs with dual rail automatic coupling installation system, it is to install, repair more convenient, people do not have to enter the sewage pits for this.
8, can be used in the whole head, and to ensure that the motor will not overload.
9, there are two different installation methods, fixed automatic coupling installation system, mobile free installation system.
The main purpose

It is suitable for sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, etc. in the industry, such as chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steelmaking plant, power plant, coal processing industry, and urban sewage treatment plant drainage system, municipal engineering, construction site, Division also used for pumping water and corrosive media.

进口污水潜水泵品牌

进口污水潜水泵原理特点及品牌(图)

德国托马斯阀门集团于1933年创建于德国鲁尔工业区,也是世界最重要的工业区。位于德国西部、莱茵河下游支流鲁尔河与利珀河之间的地区。德国托马斯阀门集团是以生产高品质、先进的阀门、测量及控制系统而享誉全球的跨国性生产企业。采用世界先进的设备及生产工艺,所有产品都在严格的质量体系监控下完成作业。并在各大洲几十个国家拥有子公司及分支机构。

相关产品
  • 进口污水潜水泵原理特点及品牌(图)

    进口铜球阀

  • 进口污水潜水泵原理特点及品牌(图)

    进口浮球阀

进口污水潜水泵原理特点及品牌(图)德国托马斯阀门中国一级总代理 XML地图

转载:http://www.cnchemmy.com/Thomas/gsxw/2208.html
赞(0) 打赏
未经允许不得转载:张拓的天空 » 进口污水潜水泵原理特点及品牌(图)
分享到: 更多 (0)

评论 抢沙发

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址

专业的IT技术经验分享 更专业 更方便

联系我们本站主机

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏